Tips For Protecting And Performing Maintenance On Your Electric Motor

If you own any kind of vehicle or construction equipment that runs on an electric motor as opposed to gas, you are likely enjoying the energy savings that the electric motor is bringing you. While it might be easier overall to maintain an electric motor compared with other types, this does not mean that they are maintenance-free. Here are a few maintenance tips to keep in mind if you own any kind of vehicle or equipment that runs on electricity.

Keep Away from Vibrations

Electric motors can be negatively affected by excessive vibrations when idle. If you work in a shop that involves machinery with multiple moving parts, you want to make sure that you keep any equipment you have with electric motors away from all other similar pieces of equipment. Those vibrations could cause the bearings in your electric motor to brush against each other.

Protect Against Rust

Electric motors do not stand up well to moisture. When an electric motor is not used for a long time, its internal parts may develop condensation or even rust. Every time you clean your electric motor and oil up the bearings, consider coating it with grease that includes rust-preventive substances.

Don't Overdo It

While regularly greasing your vehicle or machine to protect the ball bearings from vibrations and rust is a necessity, you also do not want to put too much grease into the system. Too much grease can actually cause even more damage to an electric motor than not enough.

Hire a Professional

If this all sounds like too much to handle, it might be best to hire a professional who specializes in electric motor repair and maintenance. These individuals are likely far more qualified than you at working on various types of electric motors and will know the proper amount of grease or lubricant to use for each job. 

An electric motor in your vehicle or equipment can generally be easier to manage than motors that run on fuel, but it's still a good idea to stick to a regular maintenance schedule. Grease your electric motor down with a lubricant that protects against rust, but be careful not to use too much or you could mess up the whole system. Keep your electric motor away from other moving pieces of machinery to avoid damaging the bearings with the vibrations. When in doubt, consult a professional electrician or contractor at Hackworth Electric Motors Inc for assistance.


Share